Thermowells and Temperature Measurement in Process Plants

17.11.26 12:39 PM

In short: temperature is measured at thousands of points in a process plant, by local thermometers and by sensors linked to the control system. Most sit inside thermowells that protect them from pressure, corrosion and flow. A badly designed thermowell can break from flow-induced vibration and release process fluid, so thermowells are checked with the ASME PTC 19.3 TW method. Choosing the right instrument, insertion length and thermowell shape gives safe, accurate and responsive readings. BTGC supplies Nuova Fima thermometers, thermowells and gauges.

Nuova Fima gauges and thermometers

Refineries, petrochemical plants, gas plants and power stations in the Kingdom rely on temperature readings for control, safety and energy efficiency. Thermowell failures have caused serious leaks worldwide, which is why their design is now checked more carefully.

Instrument options

InstrumentTypical use
Bimetal dial thermometerLocal reading on pipes and vessels, robust and simple
Gas or liquid-filled thermometerLocal or remote reading with capillary, vibration-resistant
RTD (Pt100)Accurate measurement for control systems
ThermocoupleHigh temperatures and fast response

Thermowell design points

  • Check every thermowell in flowing fluid with the ASME PTC 19.3 TW calculation for vortex shedding frequency and stress.

  • Limit unsupported length; long, thin wells in high-velocity gas are most at risk.

  • Choose tapered or stepped shanks and suitable materials for strength and corrosion; see material selection.

  • Make insertion long enough for accurate reading, often reaching about the middle third of the pipe, without overstressing the well.

  • Specify process connection, pressure rating and testing to match the piping class.

Chemical reactor in a process plant

Accuracy and maintenance

  • Use spring-loaded sensors that touch the bottom of the well, and heat-transfer paste where suitable, for fast response.

  • Calibrate thermometers and sensors against references at set intervals.

  • Compare local and remote readings during rounds to spot drift.

  • Inspect thermowells for erosion and corrosion at turnarounds.

  • Replace instruments with fogged dials, sticking pointers or broken glass promptly.

Nuova Fima from BTGC

Nuova Fima of Italy makes pressure gauges, thermometers, thermowells, diaphragm seals, transmitters and switches for oil and gas, petrochemical and power plants. BTGC is the Nuova Fima partner in Saudi Arabia. See also pressure gauges under vibration and the petrochemicals sector page.

Questions buyers ask

Why do thermowells break? Flow past the well sheds vortices; if their frequency is near the well's natural frequency, it can resonate and crack.

Bimetal or filled thermometer? Bimetal thermometers are simple and robust; filled systems allow remote mounting and resist vibration better.

Can BTGC supply thermowells with calculations? Yes, Nuova Fima thermowells can be supplied with wake frequency calculations.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.