In short: a triple-offset butterfly valve has a cone-shaped, metal-to-metal seal that closes without rubbing, so it can give tight shut-off at high temperature where soft-seated butterfly valves cannot. Against a gate valve of the same size it is lighter, shorter and quarter-turn, which makes automation easier. That makes it a common choice for steam, hot oil, hot gas and cryogenic isolation. BTGC supplies Krombach triple-offset butterfly valves.

Power, cogeneration, refinery and petrochemical plants in the Kingdom use large isolation valves on steam headers, heat transfer oil and hot gas lines.
Triple-offset compared
| Feature | Triple-offset butterfly | Gate valve |
|---|---|---|
| Operation | Quarter-turn | Multi-turn |
| Weight and length | Much lighter and shorter | Heavy and long at large sizes |
| Seal | Metal laminated or solid seal, friction-free closing | Metal wedge and seats |
| Automation | Small quarter-turn actuator | Large multi-turn actuator |
| Throttling | Possible within limits | Not suitable |
Selection points
Confirm pressure class and temperature with body, seal and seat materials.
Decide flow direction and whether bidirectional tight shut-off is needed.
Size the actuator on seating torque, which is high for metal seats.
For other designs, see butterfly valve types.

Installation and service
Install with the preferred pressure direction where shut-off matters most.
Check that the disc clears pipe walls and linings when opening.
Warm steam lines slowly to avoid thermal shock; see steam drain and vent valves.
Inspect seals and seats at outages and replace seal rings as needed.
Krombach from BTGC
Krombach-Armaturen is the Crane ChemPharma and Energy brand for triple-offset butterfly valves, fabricated gate and check valves and bottom drain valves. BTGC supplies Krombach valves in Saudi Arabia with spare parts. See also the power and utilities sector page.
Questions buyers ask
Can triple-offset valves replace gate valves on steam? Often yes, with savings in weight and actuation; check class, temperature and shut-off needs.
Are they zero leakage? Many designs achieve very tight shut-off; confirm the test standard and class on the data sheet.
Can they be used for throttling? Within limits set by the maker, for example away from small openings at high pressure drop.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.