In short: chemical, pharmaceutical and specialty plants use vacuum to distil heat-sensitive products at lower temperatures, recover solvents, dry powders and degas liquids. These duties load vacuum pumps with condensable and often flammable vapours. Dry screw pumps, condensers and boosters arranged correctly recover solvent, protect the pumps and keep the process stable, while explosion protection keeps it safe. BTGC supplies Leybold vacuum pumps and systems.

Specialty chemicals, pharmaceuticals, polymers and fine chemicals are growing sectors in the Kingdom. Vacuum performance often limits batch times and product quality in these plants.
Typical vacuum duties
| Duty | Notes |
|---|---|
| Vacuum distillation | Lower boiling points protect heat-sensitive products |
| Solvent recovery | Condensers before and after the pump recover solvent |
| Vacuum drying | Removes solvent or water from solids at low temperature |
| Reactor degassing and deaeration | Removes dissolved gases and air |
| Evaporation and concentration | Concentrates solutions at lower temperature |
System design points
Place a condenser before the pump to remove most vapour and reduce pump load.
Use dry screw pumps for solvent-laden gas so the oil is not contaminated; see choosing vacuum pumps.
Add Roots boosters for lower pressures and faster pump-down.
Control pump temperature to avoid condensation inside the pump and to stay below ignition limits.
Specify explosion protection for flammable solvents and hazardous areas.

Operation and maintenance
Monitor pressure, pump temperature and power to detect fouling.
Flush dry pumps with solvent or inert gas where the process deposits material.
Check condensers and cold traps for performance.
Inspect seals and exhaust systems for leaks.
Plan overhauls based on running hours and condition.
Leybold from BTGC
Leybold of Germany makes dry screw, rotary vane, Roots and turbomolecular vacuum pumps and complete vacuum systems. BTGC is the Leybold partner in Saudi Arabia. See also vacuum oil treatment and the petrochemicals sector page.
Questions buyers ask
Why put a condenser before the vacuum pump? It removes most of the vapour, recovering solvent and reducing pump load.
Can dry pumps handle flammable solvents? Yes, with suitable design, temperature control and explosion protection.
Does BTGC design vacuum systems? Yes, with Leybold for complete systems.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.