In short: a wire rope is a machine of many wires and strands that slide against each other every time it bends over a sheave or drum. Factory lubricant wears off in service, and without relubrication the rope corrodes inside and wears out early, often without obvious signs on the surface. The right rope lubricant penetrates to the core, displaces water, resists dust and sling-off, and is applied regularly by a suitable method. BTGC supplies Bel-Ray wire rope lubricants.

Port cranes, overhead cranes in steel and power plants, mine hoists, draglines and offshore cranes in the Kingdom all depend on wire ropes. Heat, dust and coastal humidity make rope lubrication especially important.
Why ropes need relubrication
Lubricant reduces friction between wires and strands, slowing internal wear and fatigue.
It protects against corrosion, especially inside the rope where inspection is difficult.
Original lubricant is used up or washed out in service.
Dry ropes wear sheaves and drums faster as well; see sheave and wire rope life.
Choosing a rope lubricant
| Property | Why it matters |
|---|---|
| Penetration | Reaches the core where wear and corrosion start |
| Water displacement | Protects ropes in humid and coastal sites |
| Adhesion and sling-off resistance | Stays on the rope at speed and in heat |
| Dust tolerance | Does not form an abrasive paste with dust |
| Compatibility | Works with the rope maker's original lubricant |

Application and inspection
Clean the rope of old, dirty lubricant before applying new lubricant where practical.
Use pressure lubricators or applicators that force lubricant into the rope.
Lubricate at intervals set by duty, environment and inspection results.
Inspect ropes for broken wires, diameter loss and corrosion as required by crane standards.
Record lubrication and inspection results together.
Bel-Ray from BTGC
Bel-Ray, a Calumet brand, makes wire rope lubricants, open gear lubricants, greases and food-grade lubricants. BTGC is the Bel-Ray partner in Saudi Arabia alongside Royal Purple. See also greases for mining, crane duty classes and the machinery handling page.
Questions buyers ask
How often should wire ropes be lubricated? It depends on duty and environment; inspection results and the rope maker's guidance set the interval.
Can I use ordinary grease on ropes? Ordinary greases may not penetrate and can trap dirt; rope lubricants are designed for this job.
Does BTGC supply rope lubricators? Lubricants and application advice are available through BTGC.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.