In short: gate, globe and check valves make up a large share of the valves in any refinery or process plant. API 600 covers bolted bonnet steel gate valves, API 602 covers compact forged valves in small sizes, and API 594 covers wafer and lug check valves, while globe and swing check valves follow related standards. A clear specification of trim, materials, bonnet type, end connections and testing avoids wrong deliveries and early failures. BTGC supplies YT Valve gate, globe and check valves.

Projects and maintenance teams in the Kingdom buy these valves in large numbers, often to owner specifications that add to the API standards. Small specification gaps can lead to valves that leak at the stem, seize, or cannot be accepted at inspection.
Which standard covers what
| Standard | Scope |
|---|---|
| API 600 | Bolted bonnet steel gate valves, typically 2 inch and larger |
| API 602 | Compact forged steel gate, globe and check valves, typically up to 4 inch |
| API 594 | Wafer, lug and double-flanged check valves |
| API 598 | Inspection and testing of valves |
| ASME B16.34 | Pressure-temperature ratings and design of valves |
What to specify
Size, pressure class and end connections (flanged, butt weld, socket weld, threaded).
Body material and trim number, for example hard-faced seats for erosive or high-temperature service; see valve materials.
Bonnet type: bolted, welded or pressure seal.
Stem sealing and fugitive emission requirements; see low-emission valves.
Operators: handwheel, gearbox or actuator, and locking devices where needed.
Testing to API 598 and any owner supplementary tests; see seat leakage classes.

Inspection and receipt checks
Check markings, tags and certificates against the purchase order.
Verify material certificates and positive material identification where required.
Witness or review pressure test records.
Check end protection, cleanliness and preservation for storage in hot, dusty conditions.
Store valves closed or as recommended, with end caps in place.
YT Valve from BTGC
YT Valve of Korea makes gate, globe and check valves to API standards and knife gate valves for slurry and solids. BTGC is the YT Valve partner in Saudi Arabia, with testing and repair at the Jubail service center. See also knife gate valves and the flow control and valves page.
Questions buyers ask
What is a trim number? A code in the API standards that defines the materials for the stem, seats and wedge or disc.
When should API 602 valves be used? For small-bore lines where compact forged valves are specified, typically up to 4 inch.
Can BTGC test valves before installation? Yes, at the Jubail service center to API 598.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.