In short: automatic lubrication systems deliver small, regular amounts of grease to many bearings and pins, which is far better than occasional manual greasing. But they only work with a grease that pumps through long lines without separating, stays in place under load and keeps out dust and water. Choosing the right grease consistency and type for the system and the climate, and checking the system regularly, protects shovels, crushers, conveyors and kilns. BTGC supplies Bel-Ray greases and lubricants.

Mining fleets, crushers, conveyors, cement kilns and steel plants in the Kingdom rely on centralised lubrication. Many failures blamed on bearings are really lubrication system problems.
Common system types
| System | How it works |
|---|---|
| Single-line | One line pressurises injectors at each point |
| Dual-line | Two lines alternate, suited to long distances and many points |
| Progressive | Divider blocks deliver grease in sequence to each point |
| Single-point lubricators | Small units on individual bearings |
Choosing the grease
Consistency (NLGI grade) suited to the system and line length, often NLGI 0 to 2.
Resistance to oil separation under pressure in lines and injectors.
High temperature stability for kilns, dryers and hot ambient.
Extreme pressure and anti-wear additives for heavily loaded pins and bushings.
Compatibility with the grease already in the system when changing products.

System checks
Check reservoir levels and refill with clean equipment.
Inspect lines for leaks, crushing and blockages.
Confirm grease reaches each point; look for fresh grease at seals.
Adjust intervals for summer heat and dusty conditions.
Record faults and alarms; see greases for mining equipment.
Bel-Ray from BTGC
Bel-Ray, a Calumet brand, makes wire rope lubricants, open gear lubricants, greases and food-grade lubricants. BTGC is the Bel-Ray partner in Saudi Arabia alongside Royal Purple. See also open gear lubrication, motor bearing grease and the mining and metals sector page.
Questions buyers ask
Can any grease be used in an automatic system? No, it must pump through the system without separating or blocking.
What happens when greases are mixed? Incompatible greases can soften or harden and stop lubricating; check compatibility first.
Does BTGC supply greases for central systems? Yes, Bel-Ray greases matched to the system and duty.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.