In short: dial thermometers give operators a local reading without power. Bimetal thermometers use a coiled strip of two metals that twists with temperature, and suit direct mounting on pipes and vessels. Gas-filled thermometers use a sealed bulb and capillary, so the dial can sit a few metres away, and they handle vibration and wider ranges well. Both normally sit in a thermowell. BTGC supplies Nuova Fima thermometers and thermowells.

Pumps, exchangers, tanks and utility lines in Saudi plants all carry local temperature gauges for operator rounds.
Bimetal or gas-filled
| Feature | Bimetal | Gas-filled |
|---|---|---|
| Principle | Twisting bimetal coil | Gas pressure in a sealed bulb |
| Remote mounting | No, dial on the stem | Yes, through a capillary |
| Vibration | Liquid-filled cases help | Generally good |
| Response | Slower | Faster with a suitable bulb |
| Typical use | Pipes, tanks, utility lines | Machines, panels, hard-to-read points |
Selection points
Choose a range so normal operation sits in the middle of the scale.
Match stem or bulb length to the thermowell and insertion depth; see thermowells.
Use stainless steel cases and suitable windows for outdoor and corrosive areas.
Choose every-angle or back-connected designs so dials face the operator.
Add liquid filling where vibration makes pointers hard to read; see gauges under vibration.

Installation and checks
Always fit in a thermowell on pressurised lines, so the instrument can be removed safely.
Protect capillaries from kinks and mechanical damage.
Keep direct sun off dials where possible; it can affect readings and windows.
Check thermometers against a reference during calibration rounds; see calibration.
Nuova Fima from BTGC
Nuova Fima makes pressure gauges, bimetal and gas-filled thermometers, thermowells, diaphragm seals and switches. BTGC supplies Nuova Fima in Saudi Arabia for projects and maintenance contracts. See also the petrochemicals sector page.
Questions buyers ask
How accurate are dial thermometers? Typically around 1% of span, depending on type and class; check the data sheet.
Can a bimetal thermometer be used without a thermowell? Only on unpressurised or low-risk points; process lines need a thermowell.
Does BTGC supply matched thermowells? Yes, thermowells sized to the thermometer and process.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.