Encoders and Measuring Systems for Presses, Punching and Forming

18.11.26 03:13 PM

In short: presses and punching machines need exact position data: the crank angle, the ram position and the feed length decide part quality and safe timing. Absolute and heavy-duty rotary encoders give crank angle and speed under strong shock and vibration, high-resolution linear measuring systems track the ram and bed, and process sensors watch press force and tool condition to stop the press before a misfeed breaks a die. BTGC supplies TR Electronic encoders and measuring systems.

TR Electronic rotary and linear encoders

Metal fabricators, steel service centres, enclosure and HVAC makers, roll-forming lines for construction and new automotive suppliers in the Kingdom all run presses and punching lines.

Where measurement is used

PointMeasuring devicePurpose
CrankshaftAbsolute or heavy-duty rotary encoderCrank angle for cam timing, top dead centre and stopping position
Ram and slideHigh-resolution linear measuring systemRam position, die height and parallelism
FeederRotary encoder on feed rollsAccurate feed length and punching pitch
Tool and processProcess monitoring sensorsTool safety and press force monitoring

Why heavy-duty matters

  • Presses produce strong shock and vibration at every stroke.

  • Heavy-duty encoders with robust bearings and housings last longer in this duty.

  • Absolute encoders keep the crank angle after power loss, so cam timing stays correct.

  • For safety-related functions, use certified encoders where required; see safety encoders.

Steel strip for pressing and forming lines

Retrofits and monitoring

  • Older presses can be upgraded with complete measuring systems, often without a new press.

  • Press force monitoring shows overloads and drifting tools before they cause damage.

  • Tool protection sensors stop the press on misfeeds or double sheets.

  • Record process data to find the cause of quality problems.

  • For hydraulic presses, see linear position sensors for cylinders.

TR Electronic from BTGC

TR-Electronic makes absolute and heavy-duty rotary encoders and high-resolution linear measuring systems, and offers sensors for punching and forming processes. BTGC supplies TR Electronic in Saudi Arabia for new machines and retrofits. See also absolute or incremental encoders and the metals and steel sector page.

Questions buyers ask

Can an old mechanical press get modern position feedback? Usually yes, by fitting an absolute encoder to the crankshaft and new controls.

What does press force monitoring do? It measures forces during each stroke and stops the press when limits are exceeded.

Does BTGC supply complete retrofit packages? BTGC supplies TR measuring systems and coordinates retrofit scope with the press owner.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.