Forged Steel Small-Bore Valves: Connections, Seal Welding and Leak Prevention

17.11.26 04:20 PM

In short: vents, drains, instrument connections, sample points and small process lines use thousands of small-bore forged steel valves. They are cheap individually, but they are also a leading source of leaks and small fires in plants, often because of the wrong end connection, poor installation or vibration. Choosing suitable connections and bonnet types, installing them correctly and supporting small-bore piping reduces leaks. BTGC supplies YT Valve forged gate, globe and check valves.

Valve testing at the BTGC service center

Many leaks reported in Saudi refineries, gas plants and petrochemical units come from small-bore connections rather than large equipment. These are easy to overlook in design and maintenance.

End connections

ConnectionNotes
Socket weldCommon in process service; requires correct gap and fillet weld
ThreadedLimited to low-risk services by many owners; can loosen with vibration
Seal-welded threadsThreads plus a seal weld for added tightness where allowed
Butt weldFor higher pressure or critical services
FlangedWhere removal is needed

Bonnet and stem options

  • Bolted bonnet: common, easy to maintain.

  • Welded bonnet: no body-bonnet gasket, good for high pressure and hazardous fluids.

  • Bellows seal: for toxic or very low emission services; see bellows seal valves.

  • Low-emission packing tested to ISO 15848 or API 624 where required.

Small-bore process piping

Installation and leak prevention

  • Follow welding procedures for socket welds, including the expansion gap.

  • Brace small-bore branches against vibration, especially near pumps and compressors.

  • Avoid using small valves as handholds or supports.

  • Check vents and drains for plugs or caps after maintenance.

  • Include small-bore connections in leak surveys.

YT Valve from BTGC

YT Valve of Korea makes forged and cast gate, globe and check valves to API standards, and knife gate valves. BTGC is the YT Valve partner in Saudi Arabia. See also API 600 and 602 valves, gate, globe and butterfly valve selection and the flow control and valves page.

Questions buyers ask

Why do small-bore connections leak so often? Vibration, poor welding, threaded joints and lack of support are common causes.

Are threaded valves acceptable in hydrocarbon service? Many owners restrict them; follow your plant's piping specification.

Does BTGC stock forged valves? Yes, common sizes and classes are held in stock.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.