In short: greases are oils held in a thickener, and different thickeners do not always mix. When incompatible greases meet in a bearing, the mixture can soften and run out, or harden and starve the bearing. Lithium complex, calcium sulphonate, polyurea, aluminium complex and clay greases each have their own compatibility pattern. Changing grease safely means purging the old product and checking compatibility first. BTGC supplies Bel-Ray greases and lubricants.

Mines, cement plants and heavy equipment fleets in the Kingdom often buy greases from several suppliers, so mixing happens more than people think.
Why mixing causes trouble
| Effect | Result |
|---|---|
| Softening | Grease runs out of the bearing, leaving it dry |
| Hardening | Grease will not flow to the contact, blocking lines |
| Oil separation | Thickener and oil part, reducing lubrication |
| Loss of additives | Lower water resistance or load capacity |
Before changing grease
Identify the thickener and base oil of both products from data sheets.
Check a compatibility chart or ask the supplier for test data.
Agree the change with the equipment maker where warranty applies.
Plan the change on a few machines first and monitor them.

Changing over safely
Purge old grease by greasing until new grease appears, or clean and repack where possible.
Shorten relubrication intervals for the first weeks after the change.
Flush and refill automatic lubrication systems; see greases for auto-lube systems.
Label grease points and guns clearly to avoid mixing again.
For heavy equipment choices, see greases for mining equipment.
Bel-Ray from BTGC
Bel-Ray, a Calumet brand, makes industrial and mining lubricants and greases. BTGC supplies Bel-Ray in Saudi Arabia. See also wire rope lubrication, the lubrication and reliability page and the mining and minerals sector.
Questions buyers ask
Are all lithium greases compatible with each other? Usually more so than different thickeners, but additives and base oils still matter; check data.
What is the safest way to change grease? Clean out the old grease where possible, or purge thoroughly and relubricate more often for a while.
Can BTGC advise on compatibility? Yes, BTGC can check product data with the manufacturer.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.