In short: long-distance belt conveyors carry ore, phosphate, limestone, coal and other bulk materials for kilometres between mines, plants and ports, often at lower cost and with less dust than trucks. Their design depends on belt type, drive arrangement, curves, take-up and start-stop behaviour, and in the Kingdom on heat, sun and sand. Good condition monitoring of belts and idlers keeps them running. BTGC supplies Tenova bulk handling equipment and systems.

Phosphate, bauxite and gold mines, cement plants, steel plants and ports in the Kingdom move very large tonnages. Conveyors are often the backbone of the operation.
Key design elements
| Element | Considerations |
|---|---|
| Belt | Steel cord or fabric, cover grades for abrasion, heat and UV |
| Drives | Number and location of drives, soft starting and control |
| Route | Horizontal and vertical curves, structures and access |
| Take-up | Gravity or winch take-up to keep belt tension right |
| Dynamics | Starting, stopping and power loss behaviour |
| Dust control | Covers, enclosed transfers or pipe conveyors |
Desert conditions
Heat and sunlight age belt covers; choose UV and heat resistant grades.
Sand and dust wear idlers and pulleys and need good sealing.
Wind can lift belts and spill material; use covers where needed.
Thermal expansion of long structures must be allowed for.
Drives and controls need cooled enclosures.

Maintenance and monitoring
Scan steel cord belts for damage and splice condition.
Monitor idlers with thermal or acoustic methods to catch failing bearings.
Check belt tracking, cleaners and skirting regularly.
Monitor drive gearboxes and motors; see conveyor gear units.
Use drives for smooth starts; see drives for conveyors.
Tenova from BTGC
Tenova, part of the Techint group, supplies ship loaders and unloaders, stacker-reclaimers and complete bulk handling systems. BTGC is the Tenova partner in Saudi Arabia. See also phosphate and fertiliser handling, stacker-reclaimers and the machinery handling page.
Questions buyers ask
When is a conveyor better than trucks? For high, steady tonnages over fixed routes, conveyors usually cost less to run and produce less dust.
What is a take-up for? It keeps the right belt tension as the belt stretches and loads change.
Does BTGC supply Tenova bulk handling systems? Yes, equipment and complete systems.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.