In short: thousands of plant valves are still operated by hand, often in a hurry during upsets. If a valve needs too much force, too many turns or a ladder to reach, operators struggle, use cheater bars that bend stems, or simply cannot isolate in time. Specifying gear operators for large valves, chainwheels or extension stems for awkward ones, and good access from the start makes manual valves safe and quick to use. BTGC supplies YT Valve gate, globe and check valves with gear operators to suit.

Large gate and globe valves in Saudi refineries, petrochemical plants and utilities often sit at height or in pipe racks. Operability problems usually show up during turnarounds and emergencies.
Common operability problems and fixes
| Problem | Fix |
|---|---|
| High handwheel force | Bevel or spur gear operator sized for the torque |
| Too many turns | Higher ratio gearbox choice or actuation for critical valves |
| Valve at height | Chainwheel with safety cable, or relocate or add platform |
| Valve in a pit or buried | Extension stem or floor stand |
| Position unclear | Position indicator or rising stem guard markings |
Good specification practice
Check required rim force against limits in standards such as EN 12570.
Specify gear operators above a set size and pressure class.
Plan access during layout; do not rely on portable ladders for frequent valves.
Consider motor actuators for emergency isolation valves; see actuator sizing.
Mark valve tags and open or close directions clearly.

Why cheater bars are a problem
They apply far more torque than the valve was designed for.
Stems bend, threads strip and gear operators break.
Packing and seats are damaged, causing leaks.
Operators can be injured when bars slip.
A valve that needs a bar is a maintenance or design issue to fix.
YT Valve from BTGC
YT Valve of Korea makes forged and cast gate, globe and check valves to API standards, and knife gate valves. BTGC is the YT Valve partner in Saudi Arabia. See also API 600 and 602 valves, gate valve pressure locking and the petrochemicals sector page.
Questions buyers ask
When does a valve need a gear operator? When handwheel force or turns exceed safe limits, typically on larger sizes and higher pressure classes.
Are chainwheels safe? Yes, when fitted with safety cables and inspected regularly.
Can BTGC supply valves with gear operators? Yes, YT Valve gate and globe valves with gear operators.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.