Storing and Preserving Pipeline Valves on Project Sites

18.11.26 02:29 PM

In short: large pipeline valves can wait months on a project laydown yard before installation. Sand, sun, humidity and rough handling can damage seats, coatings and actuators long before the valve sees service. Simple rules prevent most problems: keep end covers on, store ball valves open, protect from sand and sun, preserve the internals and actuators, and inspect at set intervals. BTGC supplies KPC ball and gate valves for pipeline projects.

KPC trunnion ball valve with gear operator

Mega-projects and pipeline spreads in the Kingdom often receive valves well ahead of tie-ins, so preservation is part of quality control.

Storage rules

ItemGood practice
End protectionKeep factory end covers fitted until installation
Valve positionBall valves fully open; gate valves as the maker advises
SupportOff the ground on timber or saddles, never on the actuator or stem
WeatherCovered or shaded storage where possible, with sand protection
LiftingOnly by the lifting lugs, never by the operator or actuator

Preservation

  • Check that internal surfaces and seats carry preservative, especially on carbon steel parts.

  • Keep actuators and gearboxes sealed, with any desiccant replaced on schedule.

  • Protect coated surfaces from damage and touch up any scratches.

  • Keep electrical actuators powered with space heaters if stored for long periods, where the maker requires it.

Pipeline project site in Saudi Arabia

Inspection and records

  • Inspect at set intervals: covers, coating, signs of water or sand inside.

  • Record each inspection with photos against the valve tag number.

  • Before installation, check seats and sealant fittings; see ball valve maintenance.

  • Similar rules apply to motors; see motor storage and preservation.

KPC from BTGC

KPC Corporation of Korea makes trunnion ball valves and through-conduit gate valves for pipelines and process plants. BTGC supplies KPC valves in Saudi Arabia with replacements and spare parts. See also trunnion ball valves and mega-projects and EPC.

Questions buyers ask

Why store ball valves open? It protects the ball and seats from damage and debris during storage.

How often should stored valves be inspected? Many projects inspect monthly or quarterly, depending on site conditions.

Does BTGC provide storage instructions? Yes, with the manufacturer's documentation for each order.

Contact the BTGC valve team

Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.