In short: chillers and refrigeration compressors depend on an oil that mixes correctly with the refrigerant, keeps its viscosity under refrigerant dilution and stays dry. Modern HFC and HFO refrigerants usually need polyol ester (POE) oils, older HCFC systems and ammonia often use mineral or alkylbenzene oils, and some systems use PAG oils. Using the wrong oil, or letting moisture in, leads to poor oil return, acid formation and compressor failure. BTGC supplies Calumet specialty oils and ester base stocks.

Air conditioning and district cooling take a large share of electricity in the Kingdom, and chillers run for long hours under high condensing temperatures. Compressor reliability directly affects comfort, process cooling and energy use.
Matching oil to refrigerant
| Refrigerant type | Typical oil |
|---|---|
| HFC and HFO refrigerants | Polyol ester (POE) oils |
| Older HCFC systems | Mineral or alkylbenzene oils |
| Ammonia | Mineral or synthetic oils approved for ammonia |
| CO2 and some special systems | POE or PAG oils as specified by the compressor maker |
Always follow the compressor maker's approved oil list; viscosity grade and approvals matter as much as oil type.
Moisture and contamination
POE oils absorb moisture from air quickly; keep containers sealed and use them soon after opening.
Moisture reacts with POE and refrigerant to form acids that attack motors and bearings.
Use filter driers and check moisture indicators regularly.
Avoid mixing oil types during retrofits without a planned flushing procedure.

Oil analysis and maintenance
Sample oil at regular intervals for acidity, moisture, viscosity and wear metals.
Change oil and filter driers when results show acid or moisture rising.
Check oil return and levels, especially at low load and in long piping systems.
Keep high condensing pressures under control by cleaning condensers and cooling towers; see cooling tower performance.
Calumet from BTGC
Calumet is a US specialty refiner of naphthenic oils, white oils, solvents, esters and lubricants, and the parent of the Royal Purple and Bel-Ray brands. BTGC is the Calumet partner in Saudi Arabia. See also evaporative condensers for ammonia refrigeration, compressor oil in hot climates and the power and utilities sector page.
Questions buyers ask
Can mineral oil be used with HFC refrigerants? Generally no; HFCs do not mix well with mineral oil, so oil return suffers. POE is normally used.
Why is POE oil sensitive to moisture? It absorbs water readily, which can hydrolyse the oil and form acids.
Does BTGC supply oil analysis? Yes, sampling and analysis can be arranged with oil supply.
Contact BTGC
Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.