In short: much of the fuel burned in gas turbines, furnaces and chemical plants leaves as hot exhaust or surplus steam. A heat recovery steam generator turns that heat into steam, and a steam turbine generator turns the steam into electricity, raising plant efficiency without burning more fuel. In a combined cycle plant the steam turbine typically makes about one third of the total output. BTGC supports Fuji Electric steam turbines and generators for power generation.

Power producers, refineries, sulphuric acid plants and industrial cities in the Kingdom look for every megawatt they can recover from existing heat.
Where waste heat steam comes from
| Source | Notes |
|---|---|
| Gas turbine exhaust | Heat recovery steam generators in combined cycle and cogeneration plants |
| Sulphuric acid plants | Heat from sulphur burning and conversion raises high-pressure steam |
| Furnaces and kilns | Waste heat boilers on flue gas |
| Surplus process steam | Can drive a turbine instead of a letdown valve; see steam pressure reducing valves |
Turbine design points
Steam conditions follow the heat source, so the turbine must run well at part load and sliding pressure.
Multi-pressure heat recovery boilers feed steam into the turbine through admission stages.
Extraction points supply process steam in cogeneration; see back-pressure or condensing turbines.
Condensing turbines often exhaust to air-cooled condensers, whose back pressure rises in summer; see ACC fan drives.
Good water chemistry and steam purity keep deposits off the blades.

Planning a project
Measure the heat really available across seasons and plant loads.
Compare the value of the power with capital and maintenance costs.
Plan grid connection and protection together with the generator supply.
Plan inspections from the start; see overhaul planning.
Fuji Electric from BTGC
Fuji Electric's power generation business supplies steam turbines and generators for conventional, combined cycle and combined heat and power plants. BTGC is the Fuji Electric partner in Saudi Arabia for power generation equipment: enquiries, spare parts and after-sales service coordination. See also the power and utilities sector page and mega-projects and EPC.
Questions buyers ask
How much power can waste heat produce? It depends on gas flow and temperature; a feasibility study measures it.
Is a heat recovery steam generator a boiler? Yes, a boiler heated by exhaust gas rather than its own burner, though some have supplementary firing.
Does BTGC supply Fuji Electric turbines? BTGC handles enquiries, spare parts and after-sales coordination for Fuji Electric power generation equipment.
Contact the BTGC power division
Email power@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.