Strip Profile, Width and Flatness Measurement in Hot Strip Mills

18.11.26 07:38 AM

In short: customers judge hot rolled strip not only by its thickness but by its shape: the thickness profile across the width, the width itself and how flat the strip lies. Multi-channel or scanning thickness gauges measure profile and crown, camera systems measure width, and optical systems measure flatness at the mill exit. Feeding these measurements back to roll bending, shifting and cooling improves yield and quality. BTGC supplies IMS Messsysteme measuring systems for rolling mills.

IMS strip measuring gauge

Steel and aluminium flat rolling in the Kingdom is growing, with tighter shape tolerances demanded by automotive, pipe and appliance customers.

What is measured

QuantityMeaningTypical method
Profile and crownThickness variation across the widthMulti-channel or scanning X-ray gauges
Edge drop and wedgeThinning at the edges, side to side differenceProfile gauges
WidthActual strip width along the lengthCamera or line-scan systems
FlatnessWaves, buckles and centre or edge loosenessOptical topography at the exit

Using the data

  • Profile and flatness feed roll bending and roll shifting control.

  • Width data adjusts edgers and reduces trimming losses.

  • Trends reveal roll wear and thermal crown changes.

  • Coil records support quality claims and customer certificates.

  • Combine with thickness and speed data for a full picture; see strip thickness gauges.

Steel strip in a rolling mill

Keeping gauges accurate

  • Calibrate with reference samples on the schedule set by the supplier.

  • Protect optics and detectors from water, steam and scale.

  • Check cooling and purge air systems in summer.

  • Verify width readings against manual measurements after maintenance.

  • Plan upgrades of older systems; see measurement modernisation.

IMS from BTGC

IMS Messsysteme of Germany supplies measuring systems for hot and cold rolling, processing lines and tube and pipe production. BTGC is the IMS partner in Saudi Arabia. See also aluminium rolling measurement, laser velocimeters and the metal sector page.

Questions buyers ask

What is strip crown? The difference in thickness between the centre and the edges of the strip.

How is flatness measured in a hot mill? Usually with optical systems that measure the strip surface shape at the mill exit.

Does BTGC supply IMS gauges? Yes, profile, width, flatness and thickness systems.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.