Vacuum Leak Detection: Finding Leaks in Vacuum Systems

18.11.26 08:17 AM

In short: air leaking into a vacuum system makes pumps work harder, stops the system reaching its target pressure and can spoil products or create explosive mixtures. Leaks are found by first confirming there is one, usually with a rate-of-rise test, then locating it, often with helium and a leak detector. Flanges, seals, valve stems, sight glasses and welds are the usual suspects, but trapped volumes and outgassing can mimic leaks. BTGC supplies Leybold vacuum pumps, systems and leak detection equipment.

Leybold vacuum pumps

Distillation columns, dryers, reactors, transformer oil plants, coating lines and laboratories in the Kingdom run vacuum systems. Small leaks add up to large energy and quality losses.

Signs of a leak

SignPossible meaning
Cannot reach base pressureLeak, contamination or pump wear
Long pump-down timeLeak or outgassing from moisture or deposits
Pressure rises quickly when isolatedReal leak or virtual leak
Pump runs hot or overloadedExcess gas load from leaks

Test methods

  • Rate-of-rise test: isolate the system from the pump and record pressure rise over time.

  • Helium leak testing: spray helium outside suspect joints while a leak detector watches the system.

  • Sniffer testing for systems that can be pressurised.

  • Bubble or foam tests for larger leaks on pressurised parts.

  • Compare results with earlier tests to see trends.

Process plant with vacuum equipment

Where leaks hide

  • Flange gaskets and O-rings, especially after maintenance.

  • Valve stem seals and bellows.

  • Sight glasses, instrument fittings and hoses.

  • Welds and cracked castings.

  • Virtual leaks from trapped volumes, porous parts and moisture; see vacuum pump types.

Leybold from BTGC

Leybold of Germany makes dry screw, rotary vane, Roots and turbomolecular vacuum pumps, complete vacuum systems and leak detectors. BTGC is the Leybold partner in Saudi Arabia. See also vacuum for solvent recovery, transformer oil dehydration and the petrochemicals sector page.

Questions buyers ask

What is a virtual leak? Gas released from trapped volumes or materials inside the system, which looks like a leak.

Why use helium for leak testing? It is light, inert and easy to detect in very small amounts.

Does BTGC supply leak detectors? Yes, Leybold leak detection equipment and vacuum pumps.

Contact BTGC

Email info@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.