In short: many oil fields keep production up by injecting treated seawater or produced water back into the reservoir. Injection systems run at high pressure, and each well has a choke that controls its share of the water, with isolation and check valves around it. The valves face large pressure drops, corrosive water, oxygen, bacteria and solids, so trim design and materials such as duplex stainless steels decide how long they last. BTGC supplies ECONTROL chokes and severe service valves for injection duties.

The Kingdom operates some of the largest water injection systems in the world. Valve failures at injection wells reduce reservoir support and are costly to repair in remote areas.
Valves in an injection system
| Valve | Role |
|---|---|
| Injection choke | Controls flow to each well against high pressure drop |
| Wellhead isolation valves | Isolate the well for maintenance |
| Check valves | Prevent backflow from the reservoir |
| Header and pump station valves | Isolate and control the distribution network |
Main threats
Cavitation and erosion across injection chokes.
Corrosion from seawater, dissolved oxygen and bacterial activity.
Solids from poor filtration or pipe scale.
Pressure surges when pumps start and stop.
Seat damage in valves that rarely operate.

Selection and maintenance tips
Choose trim designs that stage the pressure drop; see wellhead choke valves.
Use materials suited to the water chemistry, such as duplex or super duplex stainless steels.
Use hard-coated trim where solids are present; see metal-seated valves.
Track choke positions and flows to spot wear.
Plan trim and seal spares for each field.
ECONTROL from BTGC
Tecnologías ECONTROL engineers metal-seated ball valves, chokes, HIPPS and other severe service valves for mining and oil and gas. BTGC is the ECONTROL partner in Saudi Arabia. See also HIPPS, sour service valves and the oil and gas sector page.
Questions buyers ask
Why inject water into oil reservoirs? To maintain reservoir pressure and push oil towards producing wells.
What wears out injection chokes? Cavitation, erosion from solids and corrosion from the water.
Does BTGC supply injection chokes? Yes, ECONTROL chokes and severe service valves.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.