In short: most valves have cast bodies, but at very large diameters, high temperatures or special shapes, castings become slow, costly or hard to make sound. Fabricated valves are built from rolled plate, forgings and pipe welded together, which allows custom sizes, face-to-face lengths and materials, often with shorter lead times. The trade-off is that welding procedures, heat treatment and weld inspection become central to quality. BTGC supplies Krombach fabricated gate, check and butterfly valves.

Steel plants, DRI units, power stations, desalination plants and petrochemical complexes in the Kingdom use very large valves for gas, steam and water. Replacement castings can take many months.
Cast and fabricated compared
| Factor | Cast bodies | Fabricated bodies |
|---|---|---|
| Sizes | Best in standard sizes | Practical in very large and custom sizes |
| Lead time | Can be long for large patterns | Often shorter for one-off sizes |
| Materials | Limited by available casting grades | Wide choice of plate and forging grades |
| Quality focus | Casting defects, radiography of castings | Weld procedures, heat treatment and weld NDE |
| Custom geometry | Needs new patterns | Easier to adapt |
What to check on fabricated valves
Design to a recognised standard, such as ASME B16.34 or EN 12516, with calculations.
Qualified welding procedures and welders, for example to ASME Section IX.
Post-weld heat treatment where the material and thickness require it.
Radiographic or ultrasonic testing of pressure welds.
Pressure tests and documentation agreed in the ITP; see valve inspection and test plans.

Typical fabricated valve duties
Large gate and isolation valves for hot gas; see hot gas isolation valves.
Large check valves for cooling water and seawater.
Triple-offset butterfly valves in special sizes.
Valves with custom face-to-face for retrofits.
Valves in special alloys for corrosive or high temperature service.
Krombach from BTGC
Krombach-Armaturen of Germany builds triple-offset butterfly valves, fabricated gate and check valves, bottom drain valves and valves for extreme temperatures. BTGC is the Krombach partner in Saudi Arabia. See also process gas valves for DRI plants, valve body materials and the metal sector page.
Questions buyers ask
Are fabricated valves as strong as cast valves? Yes, when designed to the standard and welded and inspected correctly.
Why choose a fabricated valve? For very large or custom sizes, special materials or shorter lead times.
Does BTGC supply fabricated valves? Yes, Krombach fabricated gate, check and butterfly valves.
Contact the BTGC valve team
Email valves@btc-ksa.com or call +966 13 856 0528. Branches: Dammam, Jubail and Yanbu. Request a quote.